Currıculum Vıtae

 

      

 Işık ÇADIRCI

 

IMG_2617

 

AREAS of ınterest:     Power Electronics, Electric Motor Drives, Power Quality

 

 

Degrees:

 

B. Sc., METU Electrical and Electronics Eng. Dept., 1987.

M. Sc., METU Electrical and Electronics Eng. Dept., 1988.

Ph.D., METU Electrical and Electronics Eng. Dept., 1994.

 

 

Academıc tıtle:

 

Professor, December 2004

 

 

Professıonal jobs:

 

1987-1991       Research Assistant,  METU Electrical and Electronics Eng. Dept.

1991- 2003      Instructor, METU Electrical and Electronics Eng. Dept.

2003 -              Assoc. Prof., Hacettepe University, Electrical and Electronics Eng. Dept.

2004 -              Professor, Hacettepe University, Electrical and Electronics Eng. Dept.

1988- 2011      Part-time researcher, TÜBİTAK Ankara Electronics Research and Deveopment

                        Institute  (-1995), YÖK-38;

                        Senior Researcher, TÜBİTAK Information Technologies and Electronics Research

                        Institute, (1996-1998), YÖK-38; Chief Researcher and Vice Group Coord., TÜBİTAK Information Technologies and Electronics Research Institute

(1999-2003), Power Electronics Group Coordinator (2004-2009), YÖK-38;  Power Electronics Dept. Head, TÜBİTAK Space Technologies Research Institute, (2009-2011), YÖK-38.

1995-1997              Consultant, ASELSAN, Project Dept.


 

 

COUrses taught:

 

Ceng 200 ‘ Introduction to Computers and Programming’

EE 255 ‘ Linear Algebra and Differential Equations’

EE 256 ‘ Complex Calculus and Transform Techniques’

EE 361 ‘ Electromechanical Energy Conversion I’

EE 362 ‘ Electromechanical Energy Conversion II’

EE 209 ‘ Fundamentals of Electrical and Electronics Engineering’

EE 309 ‘ Fundamentals of Electrical Engineering’

EE 381 ‘Systems and Control’

ELE 361 ‘Electric Machines I’

ELE 454 ‘Power Electronics’

ELE 477 ‘Electric Machines II’

ELE 765 ‘Electrical Motor Drive Systems’

ELE 764 ‘Switch Mode Power Supplies’

 

awards:

 

-   IEEE Industry Applications Society, Metal Industry Committee, Meritorious Paper Award for ‘Identification of Harmonic Current Contributions of Iron and Steel Plants Based on Time-Synchronized Field Measurements – Part 2: Inside Plants’, presented in the IEEE Industry Applications Society Annual Meeting, 2013.  

 

-    IEEE IAS 2009 Annual Meeting, Metal Industry Committee, Outstanding Paper Award for ‘Electrical Power Quality of Iron and Steel Industry in Turkey’, October 2009.

 

-    IEEE IAS Magazine  Prize Paper Award for ‘Digital Control of Universal Telecommunication Power Supplies Using Dual 8-Bit Microcontrollers’ , Third Prize, September  2007.

 

-    IEEE IAS 2003 Annual Meeting, Metal Industry Committee, Meritorious Paper Award for Power Quality Solutions for 12-Pulse Smelter Converters in ETİ Aluminium Works.

 

-    IEEE IAS Industrial and Commercial Power Systems Department, ‘The 2000 Prize Paper Award for Power Systems Engineering’.

 

-          ‘Resolution of Appreciation’, PCIM’99 (Power Conversion and Intelligent Motion Conference), Nürnberg.

 

-          IEEE Metal Industry Committee, ‘Certificate of Appreciation’, 1999 Annual IEEE IAS Conference, Phoenix.

 

-          Prof. Dr. Mustafa N. Parlar Education and Research Foundation, 1997-98 Academic Year Thesis Supervisor Award.

 

-          Prof. Dr. Mustafa N. Parlar Education and Research Foundation, 1998-99 Academic Year Thesis Supervisor Award.

 

-          Prof. Dr. Mustafa N. Parlar Education and Research Foundation, 1999-00 Academic Year Thesis Supervisor Award.

 

-          Prof. Dr. Mustafa N. Parlar Education and Research Foundation, Technology Achievement Award’ 2003, is awarded to the Power Electronics Group, TÜBİTAK Information Technologies and Electronics Research Institute, for their contributions to science and technology in the industry applications of power electronics.

 

 

 

ınternatıonal patents:

 

1)      Patent Number: WO0074225,  International Publication Date: 2000-12-07 ‘Alternating Current Motor Drive for Electrical Multiple Units (EMU)

 

2)      Patent Number:WO0073100, Publication Date: 2000-12-07, ‘AC Motor Drive for Diesel-Electric Locomotives’

 

3)      A. Terciyanli, T. Avci, I. Çadırcı, M. Ermiş, ‘Seçili Harmonik Yükseltmeli Akım Kaynaklı Çevirici Tabanlı Aktif Güç Filtresi’, İncelemeli Patent No:  TR 2010 10570B.

 

 

 

publıcatıons:

 

 

Internatıonal journal papers:

 

(1) M. Ermiş, H.B. Ertan, M. Demirekler, B.M. Sarıbatır, Y. Üçtuğ, M.E. Sezer and I. Çadırcı, ‘Various Induction Generator Schemes for Wind-Electricity Generation’, Electric Power Systems Research, Vol.32, No.1, 1992, pp.71-83.

 

(2) I. Çadırcı and M. Ermiş, ‘The Double Output Induction Generator Operating at Sub- and Super- Synchronous Speeds: Steady-State Performance Optimisation and Wind Energy Recovery’, IEE Proceedings-B, Electric Power Applications, Vol.139, No.5, 1992, pp.429-442.

 

(3) I. Çadırcı and M. Ermiş, ‘ Performance Evaluation of a Wind Driven DOIG Using a Hybrid Model’, IEEE Transactions on Energy Conversion, vol.13, no.2, June 1998, pp.148-155.

 

(4) I. Çadırcı, S. Varma, M. Ermiş and T. Gülsoy, ‘ A 20 kW, 20 kHz Unity Power Factor Boost Converter for Three-Phase Motor Drive Applications From an Unregulated Single Phase Supply’, IEEE Transactions on Energy Conversion, vol.14, no.3, September 1999, pp. 471-478.

 

(5) I. Çadırcı, M. Ermiş, E. Nalçacı, B.Ertan and M. Rahman, ‘A Solid State Direct On Line Starter for Medium Voltage Induction Motors Under Minimized Current and Torque Pulsations’, IEEE Transactions on Energy Conversion, vol.14, no.3, September 1999, pp.402-412.

 

(6) A. Akdağ, I. Çadırcı, E. Nalçacı and M. Ermiş, and S. Tadakuma, ‘Effects of Main Transformer Replacement on the Performance of an Electric Arc Furnace System’, IEEE Transactions on Industry Applications, vol.36, no.2, March/April 2000, pp. 649-658.

 

(7)    G. Zenginobuz, I. Çadırcı, M. Ermiş and C. Barlak, ‘Soft Starting of Large Induction Motors at Constant Current With Minimized Starting Torque Pulsations’, IEEE Transactions on Industry Applications, vol.37, no.5, Sept./Oct. 2001, pp. 1334-1347.

 

(8)   A. Açık and I. Çadırcı, ‘Active Clamped ZVS Forward Converter With Soft-Switched Synchronous Rectifier’, Turkish Journal of Electrical Engineering and Computer Sciences, vol. 10, 2002, 473-491.

 

(9) I.Çadırcı, A. Yafavi and M. Ermiş, ‘Unity Power Factor Boost Converter With Phase Shifted Parallel IGBT Operation for Medium Power Applications’, IEE Proceedings-B, Electric Power Applications, vol.149, no.3, May 2002, pp.237-244.

 

(10) F. Bilgin, N. Köse, G. Zenginobuz, M. Ermiş, E. Nalçacı, I. Çadırcı, and H. Köse, ‘A Unity Power Factor Buck Type PWM Rectifier for Medium/High Power DC Motor Drive Applications’ IEEE Transactions on Industry Applications, vol.38, no.5, Sept./Oct. 2002, pp.1412-1425.

 

(11) M. Ermiş, Z. Çakır, I. Çadırcı, G. Zenginobuz and H. Tezcan, ‘Self Excitation of Induction Motors Compensated by Permanently Connected Capacitors and Recommendations for IEEE Std. 141-1993’, IEEE Power Systems Engineering Committee ‘The 2000 Prize Paper Award’, IEEE Transactions on Industry Applications, March/April 2003, pp. 313-324.

 

(12) A. Açık and I. Çadırcı, ‘Active Clamped ZVS Forward Converter with Soft-Switched Synchronous Rectifier for High Efficiency Low Output Voltage Applications’, IEE Proceedings-B, vol.150, no.2, March/April 2003, pp.165-174.

 

(13) B.Bilgin, I.Çadırcı, R. Ergül, and M. Ermiş, ‘Resonant Demagnetization PWM Forward Converter’, Turkish Journal of Electrical Engineering and Computer Sciences’,vol.11, no.1,  2003, pp.61-74.

 

(14) B. Mutluer, I. Çadırcı, M.Ermiş, A. Çetin, B. Gültekin, N. Özay, N. Köse, C. Ermiş, Ö.Ünver, V. Ünal, ‘A Unified Relocatable SVC for Open-Cast Lignite Mining in Turkey’, IEEE Transactions on Industry Applications, vol.40, no.2, March/April 2004, pp.650-663. 

 

(15)  Ermis, M.; Acik, A.; Gultekin, B.; Terciyanli, A.; Nalcaci, E.; Cadirci, I.; Ozay, N.; Ermis, C.; Gokmen, M.; Kiziltan, H.; ‘Power quality solutions for 12-pulse smelter converters in ETI Aluminum Works’, IEEE Transactions on Industry Applications, vol.40, no.6, Nov/Dec 2004, pp.1644-1655.  

 

(16) G. Zenginobuz, I. Çadırcı, M. Ermiş and C. Barlak, ‘Performance Optimization of Induction Motors During Voltage Controlled Soft Starting’, IEEE Transactions on Energy Conversion, vol.19, no.2, June 2004, pp.278-288.


(17) I. Çadırcı, G. Akcam, and M. Ermiş, ‘Effects of Instantaneous Power Supply Failure on the Operation of Slip Energy Recovery Drives’, IEEE Transactions on Energy Conversion, vol.20, no.1, March 2005, pp.7-15.

 

(18) K. Kutluay, Y. Çadırcı, Y. Özkazanç, and I. Çadırcı, ‘A New On-Line State of Charge Estimation and Monitoring System for Sealed Lead Acid Batteries in Telecommunication Power Supplies’, IEEE Transactions on Industrial Electronics, vol.52, no.5, Oct. 2005, pp.1315-1327.

 

(19) I. Çadırcı, B.Saka, and  Y.Eristiren; ’Practical EMI-filter-design procedure for high-power high-frequency SMPS according to MIL-STD 461’, Electric Power Applications, IEE Proceedings- vol. 152, no.  July 2005, pp.775 – 782.


(20) K. Kutluay, I. Çadırcı, A. Yafavi and Y. Cadirci, ‘Dual 8-b microcontrollers’, IEEE Industry Applications Magazine, vol.12, no.1, Jan.-Feb. 2006, pp.59 – 67 (IEEE IAS Magazine Prize Paper Award, Third Prize).

 

(21) H. F. Bilgin, M. Ermis, K. N. Kose, A. Cetin, I. Cadirci,  A Acik, T. Demirci, A. Terciyanli,     C.  Kocak, and M. Yorukoglu, ‘Reactive-Power Compensation of Coal Mining Excavators by Using a New-Generation STATCOM’, IEEE Transactions on Industry Applications, vol.43, no.1, Jan/Feb 2007, pp.97-110.  


(22) O. Salor, S. Buhan, O. Unsar, et al, .Mobile monitoring system to take nationwide PQ measurements on electricity transmission systems, Measurement,  vol. 42,  no. 4,  2009, pp. 501-515.

 

(23) O. Salor, B. Gultekin, S. Buhan, et al. Electrical Power Quality of Iron and Steel Industry in Turkey,  IEEE Transactions on Industry Applications,  vol.46, no.1,  Jan./Feb. 2010, pp.60-80.

 

(24) D. Kucuk, T. Inan, O. Salor, I. Çadırcı, and M. Ermiş, ‘PQONT: A domain ontology for electrical power quality’, Advanced Engineering Informatics,   Volume: 24   Issue: 1,  Jan 2010, pp. 84-95.

 

(25)  M. Gol, O. Salor, B. Alboyaci, et al., A New Field-Data-Based EAF Model for Power Quality Studies, IEEE Transactions on Industry Applications, vol. 46, no. 3, May/June 2010, pp.1230-1242.

 

(26) D. Kucuk, T. Inan, O. Salor, I. Çadırcı, and M. Ermiş, An extensible database architecture for nationwide power quality monitoring, International Journal of Electrical Power and Energy Systems, vol.32,  no. 6, July 2010,  pp. 559-570.  

 

(27) M. E. Kayakesen and I. Çadırcı, ‘A General Purpose Inverter Set-Up for Power Electronics Laboratory Experiments, Journal of Power Electronics, vol. 10, no. 4, July 2010, pp.434-443.


(28)
E.Altıntas, Ö. Salor, I. Çadırcı, and M. Ermis, A New Flicker Contribution Tracing Method Based on Individual Reactive Current Components of Multiple EAFs at PCC, , IEEE Transactions on Industry Applications, vol. 46, no. 5, Sept/Oct 2010, pp.1746-1754.

 

(29) A. Terciyanli, M. Ermiş and I. Çadırcı, ‘A Selective Harmonic Amplification Method for Reduction of kVA Rating of Current Source Converters in Shunt Active Power Filters’, IEEE Transactions on Power Delivery, vol.26, no.1, Jan. 2011,  pp.65-78.

 

(30) T.Demirci, A.Kalaycıoğlu, D. Küçük, et.al.,'Nationwide Real-Time Monitoring System for Electrical Quantities and Power Quality of the Electricity Transmission System', IET Generation, Transmission & Distribution, vol.5, no.5, May 2011, pp.540-550.

 

(31) A. Çoban and I. Çadırcı, ‘Active clamped two-switch forward converter with a soft switched synchronous rectifier’, IET Power Electronics Journal, vol.4, no.8, September 2011, pp. 908-918.

 

(32) A. Terciyanlı, T. Avcı, İ. Yılmaz, et.al, ‘A Current Source Converter Based Active Power Filter for Mitigation of Harmonics at the Interface of Distribution and Transmission Systems’, IEEE Transactions on Industry Applications, July/Aug. 2012, pp.1374-1386.

 

(33) A. Terciyanlı, A. Açık, A. Çetin, M. Ermiş, et.al, ‘Power Quality Solutions for Light Rail Public Transportation Systems Fed by Medium Voltage Underground Cables’, IEEE Transactions on Industry Applications, May/June 2012,  pp.1017-1029.

 

(34) B. Gültekin, C.Ö. Gerçek, T. Atalık, M. Deniz, et.al, ‘Design and Implementation of a 154 kV, +/-50MVAr Transmission STATCOM Based on 21-Level Cascaded Multilevel Converter’, IEEE Transactions on Industry Applications, May/June 2012, pp.1030-1045.

 

(35) T. Atalik, M. Deniz, E. Koç, C.Ö. Gerçek, B. Gültekin, M. Ermiş nd I. Çadırcı, “Multi-DSP and –FPGA Based Fully-Digital Control System for Cascaded Multilevel Converters Used in FACTS Applications”, IEEE Transactions on Industrial Informatics, Aug. 2012, pp.511-527.

 

(36) I. Yilmaz, M. Ermiş and I. Çadırcı, ‘Medium Frequency Induction Melting Furnace as a Load on the Power System’, IEEE Transactions on Industry Applications, July Aug. 2012, pp.1203-1214.

 

(37) I. Yilmaz, O. Salor, M. Ermiş and I. Çadırcı, ‘Field Data Based Model of Medium Frequency Induction Melting Furnaces for Power Quality Studies’, IEEE Transactions on Industry Applications, July/Aug.2012, pp. 1215 – 1224.

 

(38)  D. Kucuk D, O. Salor, M.Güder, T. Demirci, T. Inan, Y. Akkaya, I. Çadırcı, and M. Ermiş, ‘Assessment of extensive countrywide electrical power quality measurements through a database architecture, Electrical Engineering,  vol.95, no.1, March 2013, pp. 1-19. 

 

(39) T. Atalik, I. Cadirci, T. Demirci, M. Ermis, T. Inan, A. Kalaycioglu, O. Salor, ‘A Multi-Purpose Platform for Power System Monitoring and Analysis With Sample Grid Applications’, IEEE Transactions on Instrumentation and Measurement, March 2014.

 

(40) E. Terciyanlı, T. Demirci, D. Küçük, M. Saraç, I. Çadırcı, and M.Ermiş, ‘Enhanced Nationwide Wind Electric Power Monitoring and Forecast System’, IEEE Transactions on Industrial Informatics, 2013, early access article, May 2014. 

 

(41) O. Unsar, O. Salor, I. Çadırcı and M. Ermiş, ‘Identification of Harmonic Current Contributions of Iron and Steel Plants Based on Time-Synchronized Field Measurements – Part I: at PCC’,  IEEE Transactions on Industry Applications, early access article, November 2014. 

 

(42) O. Unsar, O. Salor, I. Çadırcı and M. Ermiş, ‘Identification of Harmonic Current Contributions of Iron and Steel Plants Based on Time-Synchronized Field Measurements – Part II: at PCC’, IEEE Transactions on Industry Applications, early access article, November 2014. 

 

(43) M. Guder, O. Salor, I. Çadırcı, B. Özkan, and E. Altıntaş, ‘Data Mining Framework for Power Quality Event Characterization of Iron and Steel Plants’, IEEE Transactions on Industry Applications, IEEE Transactions on Industry Applications, vol. 51, no. 4, July/August 2015, pp. 3521-3531. 

 

(44) S. Buhan and I. Çadırcı, ‘Multistage Wind-Electric Power Forecast by Using a Combination of Advanced Statistical Methods’, IEEE Transactions on Industrial Informatics, vol. 11, no. 5, October  2015, pp. 1231-1242.

 

(45) E. Altıntaş, O. Salor, U. Buyukdağlı, I. Çadırcı and M. Ermiş, ‘Correlation Between Multiple Electric Arc Furnace Operations and Unscheduled Power Flows in the Interconnection Lines at the Eastern Cross Border of ENTSO-E’,  IEEE Transactions on Industry Applications, early access paper.

 

(46)  S. Buhan, Y. Ozkazanç, and I. Çadırcı, ‘Wind Pattern Recognition and Reference Wind Mast Data Correlations With NWP for Improved Wind-Electric Power Forecasts’, IEEE Transactions on Industrial Informatics, early access paper.

 

 

 

ınternatıonal and natıonal conference papers:

 

(1) I. Çadırcı, M. Ermiş, ‘Analysis and Optimum Design of a Grid Connected Double Output Induction Generator System for Varying Shaft Speeds’ International Conference on Electrical Machines, Pisa- Italy, September 1988, Conf.  Proc., ICEM’88, pp.497-502.

 

(2) I. Çadırcı, M. Ermiş, ‘ The Double Output Induction Generator Driven by a Vertical Axis Wind Turbine’, International Mediterranean Congress on Solar and Other Renewable Energy Resources, Antalya, November 1988, Cong. Proc., pp. 511-524.

 

(3) M. Rahman, I. Çadırcı, M. Ermiş, E. Nalçacı and H. B. Ertan, ‘Design of 6.3 kV Thyristorized Switch for Direct-on Starting of Induction Motors Under Minimized Transients’, International Aegean Conference  on Electrical Machines and Power Electronics, 27-29 May 1992, Kuşadası- Turkey, Vol.2/2, pp. 784-791.

 

(4) I. Çadırcı, M. Ermiş, ‘ Commutation Angle Analysis of a Double Output Induction Generator Operating in Sub- and Super- Synchronous Modes’, MELECON’94, 12-14 April 1994, Antalya- Turkey, Conf. Proc., pp.793-796.

 

(5) A.Akdağ, E. Nalçacı, I. Çadırcı, M. Ermiş, and S. Tadakuma, ‘ Improving the Performance of an Electric Arc Furnace System With Real Time Measurements After Transformer Replacement’, International Aegean Conference on Electric Machines and Power Electronics, ACEMP’95, 5-7 June  1995, Kuşadası- Turkey, pp. 696-703.

 

(6) I. Çadırcı and M. Ermiş, ‘ Performance Evaluation of a Wind Driven DOIG Using a Hybrid Model’, presented in IEEE Power Engineering Society PES 1997 Summer Meeting, Berlin-Germany, July 1997.

 

(7) I. Çadırcı, S. Varma, M. Ermiş and T. Gülsoy, ‘ A 20 kW, 20 kHz Unity Power Factor Boost Converter for Three-Phase Motor Drive Applications From an Unregulated Single Phase Supply’, presented in IEEE PES 1998 Winter Meeting, Tampa (Florida)-USA, February 1998.

 

(8) A. Açık and I. Çadırcı, ‘ Active Clamped ZVS Forward Converter With Soft Switched Synchronous Rectifier For Maximum Efficiency Operation’, IEEE Power Electronics Specialists Conference (PESC’98) Proceedings, Fukuoka, Japan, May 1998, pp.1237-1242.

 

(9) I. Çadırcı, M. Ermiş, E. Nalçacı, B.Ertan and M. Rahman, ‘A Solid State Direct On Line Starter for Medium Voltage Induction Motors Under Minimized Current and Torque Pulsations’, presented in IEEE PES 1998 Summer Meeting in San Diego (California) - USA, July 1998.

 

(10) C. Barlak, I. Çadırcı and M.Ermiş, ‘An Induction Motor Soft Starter Minimizing Starting Torque Pulsations: Transient State Analysis Using an ABC/dq Model’, International Conference on Electrical Machines, ICEM’98, İstanbul, September 1998, pp. 1653-1658.

 

(11) N. Köse, E. Nalçacı, K. Kutluay, I. Çadırcı and M.Ermiş, ‘ A Static 2-Q Field Exciter and Starter for 1.6 MW, 6.3 kV Salient Pole Synchronous Motor’, International Conference on Electrical Machines, ICEM’98, İstanbul, September 1998, pp. 792-797.

 

(12) A. Akdağ, I. Çadırcı, E. Nalçacı and M. Ermiş, ‘Effects of Main Transformer Replacement on the Performance of an Electric Arc Furnace System’, IEEE Industrial Applications Society Annual Meeting, ‘Certificate of Appreciation’, Phoenix, USA, October 1999, pp. 1298-1307.

 

(13) A. Açık and I. Çadırcı, ‘ ZVS PWM Forward Converter With Soft Switched Synchronous Rectifier’, Power Conversion Intelligent Motion Conference (PCIM 99), ‘Resolution of Appreciation’, Nürnberg, Germany, June 1999, pp. 481-486.

 

(14) I. Korkmaz, K. Kutluay and I. Çadırcı, ‘A Digital Solution to the Load Current Sharing of Paralleled Power Supplies’, High Frequency Power Conversion Conference Proceedings (HFPC’99), Chicago, USA, November 1999, pp. 40-45.

 

(15) A. Çetin and I. Çadırcı, ‘ A High Efficiency ZVZCS Full Bridge Converter for Medium Power Low Input Voltage Applications’, Eleco’99 Conference Proceedings, Bursa, December 1999, pp. 141-145.

 

(16) I. Çadırcı, A. Yafavi and M. Ermiş, ‘ Increasing the Power Rating and Operating Frequency of Unity Power Factor Boost Converters by Phase-Shifted Parallel IGBT Operation’, The 2000 International Power Electronics Conference, IPEC’2000, Tokyo, 3-7 April 2000, pp. 874-878.

 

(17) G. Zenginobuz, I. Çadırcı, M. Ermiş and C. Barlak, ‘ Soft Starting of Large Induction Motors at Constant Current With Minimized Torque Pulsations’, IEEE Industry Applications Society Annual Meeting, Rome, October 2000,  pp.1593-1604.

 

(18) M. Ermiş, Z. Çakır, I. Çadırcı, G. Zenginobuz and H. Tezcan, ‘ Self Excitation of Induction Motors by Permanently Connected Capacitors and Recommendation for IEEE Std 141-1993, IEEE Industry Applications Society Annual Meeting, Rome, October 2000, pp.3135-3145.

 

(19) K. Kutluay, I. Çadırcı, A. Yafavi and Y. Çadırcı, ‘ Digital Control of Universal Telecommunication Power Supplies’, PCIM/HFPC2000, Boston, USA, October 2000, pp.89-96.

 

(20) A. Açık, E. Benlier and I. Çadırcı, ‘Active Clamp Reset Forward Converter With ZCS/ZVS Self Driven Synchronous Rectifier for Low Output Voltage Applications’, PCIM 2000, Boston, USA, October 2000, pp.140-145.

 

(21) F. Bilgin, N. Köse, G. Zenginobuz, M. Ermiş, E. Nalçacı, I. Çadırcı and H. Köse, ‘A Unity Power Factor Buck Type PWM Rectifier for Medium/High Power DC Motor Drive Applications’ IEEE Industry Applications Society Annual Meeting, Chicago, October 2001, pp.331-341.

 

(22) B. Mutluer, I. Çadırcı, M.Ermiş, A. Çetin, B. Gültekin, N. Özay, N. Köse, C. Ermiş, M. İnan, Ö.Ünver, V. Ünal, ‘A Unified Relocatable SVC for Open-Cast Lignite Mining in Turkey’, IEEE Industry Applications Society Annual Meeting, Pittsburg, October 2002, pp.712-722.

 

(23) K. Kutluay, I. Çadırcı, A. Yafavi, Y. Çadırcı, ‘Digital Control of Universal Telecommunication Power Supplies Using Dual 8-Bit Microcontrollers’, IEEE Industry Applications Society Annual Meeting, Pittsburg, October 2002, pp.1197-1204.

 

(24) M. Ermiş, A. Açık, B. Gültekin, A. Terciyanlı, E. Nalçacı, I. Çadırcı, N. Özay, C.Ermiş, M. Gökmen and H. Kızıltan, ‘Power Quality Solutions for 12-Pulse Smelter Converters in ETI Aluminium Works’, IEEE Industry Applications Society Annual Meeting, Salt Lake City, October 2003, pp.79-89.

 

(25) Bilgin, H.F.; Ermis, M.; Kose, K.N.; Cetin, A.; Cadirci, I.; Acik, A.; Terciyanli, A.; Kocak, C.; Yorukoglu, M.; ‘Reactive power compensation of coal mining excavators by using a new generation STATCOM’, Industry Applications Conference, 2005. Fourtieth IAS Annual Meeting. Conference Record of the 2005, vol. 1,  2-6 Oct. 2005, pp.185 – 197.

 

(26) Cetin, A.; Bilgin, H. F.; Acik, A.; Demirci, T.; Kose, K. N.; Terciyanli, A.; Gultekin, B.; Aksoy, N.; Mutluer, B.; Cadirci, I.; Ermis, M.; Ongan, K.; Akinci, N.; Reactive Power Compensation of Coal Conveyor Belt Drives by Using D-STATCOMs Industry Applications Conference, 2007. 42nd IAS Annual Meeting. Conference Record of the 2007 IEEE, 23-27 Sept. 2007, pp:1731 – 1740.


(27) Salor, O.; Gultekin, B.; Buhan, S.; Boyrazoglu, B.; Inan, T.; Atalik, T.; Acik, A.; Terciyanli, A.; Unsar, O.; Altintas, E.; Akkaya, Y.; Ozdemirci, E.; Cadirci, I.; Ermis, M.; ‘Electrical Power Quality of Iron and Steel Industry in Turkey’ IEEE Industry  Applications Conference, 23-27 Sept. 2007, pp.404 – 423.

 

(28) Ozdemirci, E.; Akkaya, Y.; Boyrazoglu, B.; Buhan, S.; Terciyanli, A.; Unsar, O.; Altintas, E.; Haliloglu, B.; Acik, A.; Atalik, T.; Salor, O.; Demirci, T.; Cadirci, I.; Ermis, M.; Mobile Monitoring System to Take PQ Snapshots of Turkish Electricity Transmission System Instrumentation and Measurement Technology Conference Proceedings, 2007 IEEE 1-3 May 2007, pp. 1 – 6.


(29) Demirci, Turan; Kalaycioglu, Alper; Salor, Ozgul; Pakhuylu, Serkan; Dagli, Mehmet; Kara, Tugberk; Aksuyek, Hasan S.; Topcu, Cigdem; Polat, Beyhan; Bilgen, Semih; Sezen, Umut; Cadirci, Isik; Ermis, Muammer; National PQ Monitoring Network for Turkish Electricity Transmission System, Instrumentation and Measurement Technology Conference Proceedings, 2007 IEEE 1-3 May 2007.

 

(30) M. Deniz, B. Gültekin, C. Ö. Gerçek, T. Atalık, I. Cadırcı, M. Ermis, ‘A New DC Voltage Balancing Method for Cascaded Multi-level Inverter Based Statcom’, ACEMP07, September 10-12, 2007, pp.532-535.

 

(31) D. Küçük, T. Inan, B.Boyrazoğlu, S. Buhan, Ö.Salor, I.Çadırcı, M. ErmişPQStream: A Data Stream Architecture for Electrical Power Quality’, IWKDUDS 2007, September 17, 2007, pp,47-58.

 

(32) Salor, O; Gultekin, B; Buhan, S, et al., Electrical Power Quality of Iron and Steel Industry in Turkey, 42nd Annual Meeting of the IEEE-Industry Applications-Society, Sept. 23-27, 2007, New Orleans, vol.1-5, pp.404-423, Sept. 2007.

 

(33) Kose, N; Salor, O; Cadirci, I, Light Flicker Evaluation of Power Systems Based on Frequency Spectrum of Voltage Waveforms , IEEE 17th Signal Processing and Communications Applications Conference, APR 09-11, 2009 Antalya, Turkey, vol. 1 and 2,  pp. 832-835,  2009.

 

(34)  Göl, M; Salor, O; Alboyacı, B, et al., A New Field-Data Based EAF Model for Power Quality Studies, IEEE Industry-Applications-Society Annual Meeting,  Oct. 05-09, 2008 Alberta Canada, vol. 1-5,  pp. 21-31, 2008.


(35) Küçük, D; Salor, O; Inan, T, et al., Building an Ontology for Flexible Power Quality Querying, 23rd International Symposium on Computer and Information Sciences, Date: Oct. 27-29, 2008 Istanbul-Turkey, pp. 251-256, 2008.

 

(36) Demirci, T; Kalaycıoğlu, A; Salor, O, et al., National Power Quality Monitoring Network and Assessment Center for the Turkish Electricity Transmission System: Recent Developments, IEEE 16th Signal Processing and Communications Applications Conference, April 20-22, 2008 Aydın, Turkey, vol. 1 and 2,  pp. 172-175, 2008.

 

(37) E. Altintas, O. Salor, I. Cadirci, and M. Ermis, ‘ A New Flicker Contribution Tracing Method Based on Individual Reactive Current Components of Multiple EAFs at PCC’, Industry Applications Society Annual Meeting,  IAS 2009, Texas-Houston,   pp.1-8, October 2009.

 

(38) A. Terciyanlı, A. Açık, A. Çetin, et.al, ‘Power Quality Solutions for Light Rail Public Transportation Systems Fed by Medium Voltage Underground Cables’, Industry Applications Society Annual Meeting,  IAS 2010,  Atlanta-USA,  September  2010.

 

(39) A. Terciyanlı, T. Avcı, I. Yılmaz, et.al, ‘A Current Source Converter Based Active Power Filter for Mitigation of Harmonics at the Interface of Distribution and Transmission Systems’, Industry Applications Society Annual Meeting,  IAS 2010,  Atlanta-USA,  September  2010.

 

(40) B. Gültekin, C.Ö. Gerçek, T. Atalık et.al, ‘Design and Implementation of a 154 kV, +/-50 MVAr Transmission STATCOM Based on 21-Level Cascaded Multilevel Converter’, Industry Applications Society Annual Meeting,  IAS 2010,  Atlanta-USA,  September  2010.

 

(41) İ. Yılmaz, M. Ermiş and I. Çadırcı, ‘Medium Frequency Induction Melting Furnace as a Load on the Power System, Industry Applications Society Annual Meeting,  IAS 2011,  USA,  October 2011.

 

(42) İ. Yılmaz, Ö. Salor, M. Ermiş and I. Çadırcı, ‘Field-Data Based Modeling of Medium Frequency Induction Melting Furnaces for Power Quality Studies, Industry Applications Society Annual Meeting,  IAS 2011,  USA,  October 2011.

(43) I. Çadırcı, M. Ermiş, ‘ Şebekeye Bağlı Değişken Hızlı Çift Çıkışlı Endüksiyon Generatöründe Maksimum Güç Transferi Probleminin İncelenmesi’, Elektrik Mühendisliği  2. Ulusal Kongresi, ODTÜ, Ankara, Kongre Yayınları, Kısım 2, Eylül 1987, pp. 716-719.

 

(44) Ü. Orlu, I. Çadırcı, ‘Mikroişlemci Tabanlı Rüzgar Enerjisi Dönüşümü Denetim Sistemi’, EIE Seminer Notları, TÜBİTAK-AEAGE, 1993.

 

(45) A. Akdağ, E. Nalçacı, M. Ermiş. I. Çadırcı, ‘ Bir Elektrik Ark Ocağı Sisteminin Optimum Çalışma Koşullarının Belirlenmesi’, Elektrik Mühendisliği 6. Ulusal Kongresi, ODTÜ, Bursa, Kongre Yayınları, 1995, pp.146-150.

 

(46) K. Kutluay, Y. Çadırcı, A. Yafavi, I. Çadırcı, ‘Telekomünikasyon Uygulamaları İçin Anahtarlamalı Güç Kaynaklarının Sayısal Denetimi’, TOK’2000, Otomatik Kontrol Ulusal Toplantısı, 21-22 Eylül 2000, Hacettepe Üniv., Ankara, pp.72-76.

 

(47) B. Gültekin, A. Terciyanlı, A. Açık, M. Ermiş, I. Çadırcı, N. Özay, M. Gökmen, ‘ETİ Alüminyum Tesislerindeki 12-Darbeli Elektroliz Doğrultucuları İçin Güç Kalitesi Çözümleri’, Eylül 2003, Elektrik Mühendisliği Ulusal Kongresi, İstanbul, pp. 185-188.

 

(48) T. Demirci, A. Kalaycıoğlu, Ö. Salor, S. Pakhuylu, T. İnan, D. Küçük, M. Güder, T. Can, Y.Akkaya, S. Bilgen, I.Çadırcı, M.Ermiş, Türkiye Elektrik İletim Sistemi için Yurt Çapında Güç Kalitesi İzleme Ağı ve Veri Değerlendirme Merkezi: Güncel Gelişmeler,  Sinyal İşleme ve Uygulamaları Kurultayı, SİU 2008, Didim 20–22 Nisan 2008.

 

(49) N. Kose, O. Salor, I. Cadirci,  Gerilim Dalgalarının Frekans Spektrumunu Kullanarak Güç Sistemlerindeki Işık Kırpışmasının Hesaplanması, SIU 2009.

 

(50) M. Güder, Ö. Salor, I. Çadırcı, “Integrated Instance-Based And Kernel Methods For Power Qualıty Knowledge Modelıng”, KDIR 2010 - International Conference on Knowledge Discovery and Information Retrieval, Spain, October 2010.

 

(51) E. Önal, B. Saka and I. Çadırcı, ‘MIL-STD-461E Standardı CE102 Gereksinimine Uyumlu Elektromanyetik Girisim Süzgeci Tasarımı’, URSI 2010, KKTC, 2010.

 

(52) E. Altıntaş, Ö. Salor, I. Çadırcı, M. Ermiş, "Elekrik Sisteminin Ortak Bağlantı Noktasından Beslenen Yüklerin Kırpışma Katkılarının Belirlenmesi", IEEE 19. Sinyal İşleme ve İletişim Uygulamaları Kurultayı, Nisan 2011, Antalya.

 

(53) M. Ermiş ve I.Çadırcı, ‘Türkiye’de Esnek AA İletim Sistemi Uygulamaları’, Çağrılı Bildiri, 4. Enerji Verimliliği ve Kalitesi Sempozyumu, 12-13 Mayıs 2011. 

 

(54) M. Ermiş, I. Çadırcı ve E. Terciyanlı, ‘Türkiye’de Rüzgardan Üretilen Elektriksel Güç İçin İzleme ve Tahmin Merkezi’, Çağrılı Bildiri, Elektrik Mühendisliği Günleri, Eylül 2011.

 

(55) O. Unsar, O. Salor, I. Çadırcı and M. Ermiş, ‘Identification of Harmonic Current Contributions of Iron and Steel Plants Based on Time-Synchronized Field Measurements – Part I: at PCC’, Industry Applications Society Annual Meeting,  IAS 2013,  USA,  October 2013.

 

(56) O. Unsar, O. Salor, I. Çadırcı and M. Ermiş, ‘Identification of Harmonic Current Contributions of Iron and Steel Plants Based on Time-Synchronized Field Measurements – Part II: at PCC’, Industry Applications Society Annual Meeting,  IAS 2013,  USA,  October 2013.

 

 (57) Ö. Ünsar, Ö. Salor, I. Çadırcı, M. Ermiş, “Elektrik Sistemi Ortak Bağlantı Noktalarında Harmonik Akım Katkılarının Ölçüme Dayalı Olarak Belirlenmesi”, IEEE 20. Sinyal İşleme ve İletişim Uygulamaları Kurultayı, Nisan 2012, Fethiye.

 

(58) İ. Yılmaz, Ö. Salor-Durna, I. Çadırcı, M. Ermiş, “Sinüzoidal Kodlama ile Orta Frekanslı Endüksiyon Ergitme Ocaklarının Güç Kalitesinin İncelenmesi”, SIU 2013, KKTC, Nisan 2013

 

(59) S. Öztürk and I. Çadırcı, ‘dsPIC Microcontroller Based Implementation of a  Flyback PV Microinverter Using Direct Digital Synthesis’, IEEE ECCE 2013, USA, October 2013.

 

(60) B. Çağlar, E. Caglav and I. Çadırcı, ‘Combined Microcontroller and FPGA Control of Flyback Inverter Using a System-on-Chip Device’, PEMC 2014, Antalya, June 2014.

 

(61) M. Guder, O. Salor, I. Çadırcı, B. Özkan, and E. Altıntaş, ‘Data Mining Framework for Power Quality Event Characterization of Iron and Steel Plants’, IEEE IAS 2014 Annual Meeting, Vancouver, Canada, October 2014.

 

(62) E. Altintas, O. Salor, U. Buyukdagli, I. Cadirci and M. Ermis, "Correlation between multiple electric arc furnace operations and unscheduled power flows in the interconnection lines at the eastern cross border of ENTSO-E," Industry Applications Society Annual Meeting, 2015 IEEE, Addison, TX, 2015, pp. 1-8.

 

(63) S.Öztürk, and I.Çadırcı, ‘A Generalized Control Approach for Photovoltaic Grid-Tie Microinverters’, ACEMP15, Sept. 2015.  

 

(64) S, Öztürk, I. Çadırcı, ‘A Generalized and Flexible Control Scheme for Photovoltaic Grid-Tie Microinverters, ICRERA 15, Nov. 2015.

 

 

 

M.Sc. and ph.d. theses:

 

·         ‘ The Double Output Induction Generator for Varying Shaft Speeds’, M. Sc. Thesis, by Işık Çadırcı, September 1988.

 

·          ‘Steady-State  and Transient Performance Analyses of a Double Output Induction Generator Operating at Subsynchronous and Supersynchronous Speeds’, Ph.D. Thesis, by Işık Çadırcı, May 1994.

 

 

m. sc. theses supervısed:

 

1- ‘Analysis and Implementation of Resonant Demagnetization Forward Converter’ by Bülent Bilgin, December 1994 (cosupervisor)

 

2- ‘Double Output Induction Generator With a Modified Forced- Commutated Rotor Side  Converter’, by Şahin Sarıkaya, January 1995.

     

3- ‘Harmonic Analysis of a Double Output Induction Generator’, by Afsaneh  Mesry, September 1995.

 

4- ‘Design and Implementation of  200 J/sec Capacitor Charging Power Supply  and Flashtube Driving System’, by Birol Erentürk, November 1995.

 

5- ‘Analysis and Design of an Induction Motor Soft Starter by the Use of a Hybrid Model’ by Cüneyt Barlak, September 1996 (cosupervisor).

 

6- ‘Improving  the  Performance  of  Slip  Energy  Recovery Drives in Presence of AC Supply Disturbances’, by Gökhan Akçam, January 1997.

 

7- ‘A High Frequency High Power Switch Mode Battery Charger’, by Ahmet  Pakfiliz, October 1997.

 

8- ‘Design and Implementation of a 20 kW, 20 kHz Boost Chopper’, by Sertan Varma, December 1997.

 

9- ‘EMI  Filter Design for  High Frequency,  High Power SMPS’,  by Yalım  Eriştiren, July 1998.

 

10- ‘Active  Clamped  ZVS  Forward  Converter  With Soft Switched Synchronous  Rectifier  for 

Maximum  Efficiency Operation’  by Adnan Açık, December 1998.

 

11- ‘A  40 kHz  Unity  Power  Factor  Boost Converter  With Phase Shifted Parallel  IGBTs, for Medium Power Operation, by Ahmed Yafawi, July 1998.

 

12- ‘Digital Controller Implementation for Load Current Sharing of SMPS’, by Ilgaz Korkmaz, September 1999.

 

13- ‘Implementation of a Voltage Controlled Soft Starter for Constant Current Starting of Induction Motors With Minimized Torque Pulsations’ by Gürkan Zenginobuz, January 2000.

 

14- Self Excitation of Induction Motors Compensated by Permanently Connected Capacitors’, by Zafer Çakır, February 2000.

 

15- ‘High Efficiency ZVZCS Full-Bridge Converter for Medium Power Low Input Voltage Applications’, by Alper Çetin, February 2000.

 

16- ‘Post Regulation Methods in Multiple Output SMPS and Implementation of a Two-Output Forward Converter With Synchronous Switch Post Regulator, by Murat Baran, January 2000.

 

17-  ‘Simulation of a Shunt Active Power Filter Using PSCAD/EMTDC’ by Serkan Balbay, May 2000.

 

18- ‘Active Clamp/Reset Forward Converter With ZCS/ZVS Self Driven Synchronous Rectifier for Low Output Voltage Applications’ by Emre Benlier, September 2000.

 

19- ‘Modeling and Simulation of a STATCOM for Use in Transmission Systems’, by Armağan Akgül, April 2007.

 

20- ‘Hardware Design of Power Quality Monitor Communicating via Internet’, by Tevhid Atalık, September 2007.

 

21- ‘The Application of Chopper Controlled Rotor Resistance for Optimum Starting Performance of Wound Rotor Induction Motors’, by Sumeyra Kaya, September 2007.

 

22- ‘Computer/Microcontroller Based General Purpose Inverter Control’, by Erman Kayakesen, September 2007.

 

23- ‘Internet Assisted Control of Switch Mode Power Supplies’, by O.Volkan Karaca, Sept. 2007.

 

24- ‘Electromagnetic Compatibility of Electric Power Quality Monitor According to EN61326 Standard’, by Özgür Yaman, December 2007, (co-supervisor).

 

25-  ‘Comparison of Various Control Techniques for Current Source Active Power Filters’, by  Tülay Avcı, 2008.

 

26- ‘Active Clamp Two Switch Forward Converter’, by Ahmet Çoban, May 2009.

 

27- ‘Data Mining Methods for Clustering Power Quality Data Colleced Via Monitoring Systems Installed on the Electricity Network’, by Mennan Güder, September 2009 (co-supervisor).

 

28- ‘Design and Implementation of a Voltage Source Converter Based Hybrid Active Power Filter’, by Onur Uçak, September 2009, (co-supervisor).

 

29- ‘DSP Based Implementation of a 10 kVA Voltage Source Active Power Filter’, by İlker Kocabaş, September 2009.

 

30- ‘Permanent Magnet Brushless DC Motor Drive’, by Dağhan Çaycı, 2007.

 

31- ‘Design of a Three-Level Statcom for Reactive Power Compensation of Unbalanced Phases’, by Habib Behpoor, 2010.

 

32- ‘Determination of Harmonic Current Contributions at Points of Common Coupling of the Electrical System Based on Field Measurements, by Özgür Ünsar, 2010.

 

33- ‘Electromagnetic Interference Filter Design Compliant With CE102 Requirement For Parallel Connected DC/DC Converters’, by Erhan Önal, 2010, (co-supervisor).

 

34- ‘Design and Implementation of a Digitally Controlled Flyback Inverter’, by Bülent Çağlar, 2011.

 

35- ‘Design and Implementation of a Digitally Controlled Switch Mode Power Supply’, by Emrah Yüksel, 2012.

 

36- ‘Mitigation of Power Quality Problems of Long Distribution Lines Using SVC’, by M. Barghi Latran, 2012 (co-supervisor).

 

37- ‘dsPIC Micrcontroller Based Implementation of a Flyback Photovoltaic Microinverter Using Direct Digital Synthesis’  by Serkan Öztürk, 2014.

 

38- ‘Design and Implementation of Soft Switched Full Bridge Series Resonant Inverter for Photovoltaic Applications’, by Ahmetcan Uralcan, 2014. 
 
39- ‘On-LineApplication of SHEM to Grid-Connected Inverters With Variable DC Link Voltage by Particle Swarm Optimization’, by Umut Güvengir, 2014 (co-supervisor). 
 

40- ‘Design of an Interleaved PWM Rectifier for AC Locomotives and Implementation of its Laboratory Prototype’, by Mesut Uğur, August 2015, (co-supervisor).

 

 

 

ph.d. theses supervısed:

 

1. ‘High Power Digital SMPS’, Ph.D. Thesis, by Koray Kutluay, 2005.

2.  ‘Design and Implementation of a Current Source Converter Based Active Power Filter for Medium Voltage Applications’, Cosupervisor, Ph.D. Thesis, by Alper Terciyanlı, 2010.

3.  ‘Wind Electric Power Forecast Using Advanced Statistical Methods’, by Serkan Buhan, 2015.

 

 

research and development projects:

 

Motor Control Systems:

 

(1)     ‘Development of a Naturally-Commutated Converter Cascade for Double Output Induction Generators’, 1989, TÜBİTAK Ankara Electronics Research and Development Institute (Project Manager).

 

(2)     ‘Design and Implementation of a Static AC Switch for  Direct- on-Line  Starting of  250 kW, 6.3 kV  Induction Motors’, 1991, for İskenderun Iron and Steel Plant.

 

(3)     ‘Development of New Generation Auxiliary Motor Drive Systems for Electric Locomotives, Consultancy Project’, February 1995.  for ASELSAN.

 

(4)     ‘Design and Implementation of 20 kW, 20 kHz Unity Power Factor Boost Converter for AC Motor Drives of Auxiliary Fan and Compressor Loads in E14000 Type Electric Locomotives, January 1996, for ASELSAN –TÜLOMSAS.

 

(5)     ‘Development of a  6.3 kV, 1.6 MW Synchronous Motor Static Exciter and Starter’, May 1997, for İskenderun Iron and Steel Plant.

 

(6)     ‘Development of a Soft Starter for Medium Voltage Induction Motors’, for TÜBITAK-Bilten, Information Technologies and Electronics Research Institute, 2000, (Project Manager).

 

(7)      ‘New Generation DC Motor Drives Based on Unity Power Factor PWM Buck Rectifier for Medium Power Applications’, for Iskenderun Iron and Steel Plant, 2001.

 

- UNITYDC – SINTER:  İSDEMİR 25 kW DC Motor Drives for Sinter Bands

- UNITYDC – COOLER: 32 kW’lık Dc Motor Drives for Straight Line Cooler Strands. 

- UNITYDC – SWING: 70 kW DC Motor Drives for Universal Boom Turning Machines. 

 

(8) ‘Static AC and DC Motor Control Systems: Survey, Investigation and Development of New Technologies‘, Project No. EEEAG-65/DPT, May 1993, for DPT.

 

(9) ‘Design of Thyristorized Drives for High Power Electric Motors‘, METU Research Fund Project No. 95-06-00-03-01, August 1995 (Project Manager). 

 

(10)      Development of Static Exciter Systems for Gezende Hydroelectric Power Plant, 2011,  EÜAŞ.

 

 

Microcontroller Based Systems:

 

(11) ‘Design and Implementation of a Dual Microcontroller Based Rectifier Modules for Telecom Applications‘ (Project Manager), developed by TÜBİTAK-Bilten/ SİSTAŞ joint project team. This project received the 1999 Technology Achievement Award in the 3rd Technology Congress from  TÜBİTAK-TTGV-TÜSİAD, and the associated product is exhibited in the Powersystems World 2000 Exhibition (Boston-USA).

 

(12) ‘Microprocessor Based Controller Design for a Wind Energy Conversion System‘, 1993, for EIE. 

 

 

Power Quality Projects:

 

(13) ETİ Aluminum Works: 10.5 kV, 2x7.5 MVAr Reactive Power Compensation and Harmonic Filtering System Turn-Key Project, 2001, for ETİ Holding (Project Coordinator)

 

(14) İSDEMİR Mersin River Water Pumping Station: Reactive Power Compensation of 6.3 kV,  630 kW Induction Motors by Permanently Connected Shunt Capacitors With Inrush-Outrush Current Limiting Reactor, 1999, for İskenderun Iron and Steel Plant.

 

(15) TKİ Aegean Lignite Enterprises:  34.5 kV and 15 kV, 1.5 MVAr and 1.0 MVAr Static Reactive Power Compensation and Harmonic Filtering Systems Turn-Key Project, 2001, for Turkish Coal Enterprises (Project Manager).

 

(16) TKİ Çan Lignite Enterprises:  34.5 kV, 1.5 MVAr Static Reactive Power Compensation and Harmonic Filtering System Turn-Key Project, 2001, for Turkish Coal Enterprises (Project Manager).  

 

(17) ‘TRT Çakırlar Radio Transmitter Station: 15 kV, 1 MVAr Reactive Power Compensation and Harmonic Filtering System’, 2002, for Turkish Radio and Television.

 

(18)  TKİ Bursa Lignite Enterprises:  34.5 kV, 1.5 MVAr Static Reactive Power Compensation and Harmonic Filtering System Turn-Key Project, 2002, for Turkish Coal Enterprises (Project Manager).

 

(19) TKİ Southern Aegean Lignite Enterprises:  34.5 kV, 1.5 MVAr Static Reactive Power Compensation and Harmonic Filtering System Turn-Key Project, 2005, for Turkish Coal Enterprises.

 

(20) Design and Implementation of a 13.8 kV, 32 MVAr Statik VAr Kompanzatörü Geliştirilmesi for Laddle Furnaces, 2007 for ERDEMIR Iron and Steel Plant.

 

(21) National Power Quality Project of Turkey: Project Manager of TÜBİTAK-Bilten (Uzay) Participating Institutions:  TEİAŞ, TÜBİTAK-Bilten (Uzay), ODTÜ, HÜ, DEÜ, YTÜ, 2006-2009, for TÜBİTAK – Kamag (Turkish Scientific and Technological Research Council, Public Institutions Research Group).

 

(22) Dissemination of National Power Quality Analyzers over Turkish Electricity Transmission System, 2010, for TEIAS.

 

(23) STATCOM-DAMP: Development of an Interarea Oscillation Identifier  and Countermeasures for Interarea Oscillation Damping With Static Synchronous Compensator and SVCs, 2011,  for TEIAS.

 

(24) Design and Implementation of Active Power Filters for Induction Melting Furnaces, 2011, for Megademir.

 

 

Survey, Investigation and Reporting Projects:

 

(25)      Static AC ve DC Motor Control Systems: Investigation, Analysis and Development of New Technologies,  Project No. EEEAG-65 for DPT.

 

(26) ‘Samsun Ladik  Cement Works Electric Network:  Surveying, Investigation, and Reporting the Present Status of a Conventional Slip Energy Recovery Drive’, Ladik-Ankara, July 1993, for ÇİTOSAN.  

 

(27) ‘EKDEMIR Elektric Arc  Furnace System: Theoretical and Experimental Investigations for Optimizing System Performance’, February 1995, for Ekinciler Iron and Steel Works.

 

(28) ‘Ankara Metro Fare Collection System at Sıhhiye Station’, Troubleshooting Project,  March 1999, for SNC Lavalin.

 

(29) ‘Samsun Yeşilyurt Electric Arc Furnace Performance Analysis and Reporting’, March 2000,  for Yeşilyurt Iron and Steel Works. 

 

(30) ‘ETİ Aluminum Works  Reactive Power Compensation and Harmonic Filtering: Status Report,   Solutions, and Project Work’, 2000, for ETİ Holding. 

 

(31) ) ‘TKİ – Aegean Lignites Enterprise, Reactive Power Compensation and Harmonic Filtering: Status Report,  Solution Proposals,  Final Report and Preliminary Projects’, 2000, for Turkish Coal Enterprises.

 

(32) TKİ- Çan Lignites Enterprise, Reactive Power Compensation and Harmonic Filtering: Status Report,  Solution Proposals,  Final Report and Preliminary Projects’, 2000, for Turkish Coal Enterprises.

 

(33) TKİ- Southern Aegean Lignite Enterprise, Reactive Power Compensation and Harmonic Filtering: Status Report,  Solution Proposals,  Final Report and Preliminary Projects’, 2000, for Turkish Coal Enterprises.

 

(34) ‘TKİ- Bursa Lignite Enterprise, Reactive Power Compensation and Harmonic Filtering: Status Report,  Solution Proposals,  Final Report and Preliminary Projects’, 2000, for Turkish Coal Enterprises.

 

(35) ‘TRT Çakırlar Radio Transmitter Station, ‘Reactive Power Compensation and Harmonic Filtering Project: Status Report,  Solution Proposals,  Final Report and Preliminary Projects’, 2000, for Turkish Radio and Television.

 

(36) ‘Gölcük Navy Base, Reactive Compensation System for Power Submarine Accumulator Chargers Power Station Status Report,  Solution Proposals,  Final Report and Preliminary Projects’, 2001, for Eser Mühendislik.

 

(37) ‘TKİ- Yeniköy Lignites Enterprise, Reactive Power Compensation and Harmonic Filtering: Status Report,  Solution Proposals,  Final Report and Preliminary Projects’, 2000, for Turkish Coal Enterprises.

 

(38)  Investigation of Traction System Technologies and Preliminary Design of Traction Converters for Electric Locomotives, 2013, for ASELSAN.

 

(39) Evaluation of the Applicability of Current Regulations and Legislations on Flicker and Harmonics on Electric Power Quality, 2014, for TCUD.

 

 

 

Renewable Energy Systems:

 

(40)  YALOVA Wind Assisted Pumped Water Storage Electromechanical Systems Conceptual Design Project, 2011, for EIE (Project Manager).

 

(41)  Development of a Monitoring and Forecast System for the Electrical Power Generated From Wind in Turkey, 2011, for EIE (Project Manager).

 

(42) Collaboration and Technology Transfer Project - Microinverter for PV Applications, 2011, for  KACST.

 

(43) Design and Prototype System Implementation of a Novel 100 kW, Grid Connected Photovoltaic Power Supply With Battery Energy Storage – Design and Implementation of the DC-DC Power Converter, 2013 – 2015, for ARTI Endüstriyel Elektronik.